SOS Leak Sensor

29,00 excl. VAT

Available on backorder, please contact us to know the delivery times

Description

The SOS Leak Sensor can detect water leaking into an improperly sealed Watertight Enclosure quickly and reliably, before any major damage can occur! Though we are confident in the quality of our Watertight Enclosures and a leak is unlikely, the SOS Leak Sensor will give you additional peace of mind that your electronics are safe. Four re-usable sponge tipped probes with an adhesive backing let you monitor all corners of a Watertight enclosure, from the penetrators to the front and rear flanges. When a leak is detected, the signal is pulled high to VCC and bright red LED shines, making it easy to integrate with an Arduino, Raspberry Pi, Pixhawk, and many other 3.3v or 5v devices. The ArduSub firmware supports the SOS Leak Sensor on the Pixhawk by default.

Contents

  • 1 x SOS Leak Sensor Probe Host Board
  • 2 x 6″ Probe
  • 2 x 12″ Probe
  • 1 x 4″ Three Pin Extension Cable
  • 4 x Replacement Probe Tips
  • 1 x Double Sided Foam Tape
  • 8 x Zip Ties

Resources

Additional information

Weight 0.002 kg
Dimensions 2.46 x 1.33 x 0.58 cm

Reviews

There are no reviews yet.

Be the first to review “SOS Leak Sensor”
SKU: 01.03.012 - BLU - SOS LEAK SENSOR Categories: ,

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Nido Robotics will be closed from 21/12/2018 until 07/1/2018 due to Christmas Holidays. Orders placed in this period will be sent afterward.

Happy Holidays!

Log in with your credentials

Forgot your details?